ManTheMister Posted November 25, 2018 Share Posted November 25, 2018 (edited) It would, but that is one small disadvantage that pales in comparison with the advantages. Being able to tell if a drone is disconnectedness, sending commands to drones without crosstalk, and more. Edited November 25, 2018 by ManTheMister Autocowreck. Link to comment Share on other sites More sharing options...
Garheardt the Black Posted November 25, 2018 Share Posted November 25, 2018 Aye, but we've also discussed other ways of doing those things that don't involve adding fragile parts to drones, so the listed advantages don't mitigate the drawbacks. Link to comment Share on other sites More sharing options...
Lurkily Posted November 25, 2018 Author Share Posted November 25, 2018 Both 400 and 4000 are aberrations; the TNT on the low side, the factory's ridiculous HP on the other. Every logic piece, connector included is 1000; every 2x2 sensor is 1000, every 1x1 is 500, and every 4x4 sensor is 2000. Logic and sensors are not particularly fragile. You just notice it when they break, because everything goes sideways. Every gun, the regular and jump thrusters, 2x2 power and fuel, and the 1x1 armor block is 1000 HP, by comparison. All sorts of crucial stuff is 1000 HP. I am of the opinion that logic will need to go local eventually; this architecture eliminates any ambiguity and weirdness, like connectors blocking signals. Link to comment Share on other sites More sharing options...
ManTheMister Posted November 25, 2018 Share Posted November 25, 2018 Do you mean every 1x1 sensor is 500, every 2x1 is 1000, and every 2x2 is 2000? Because the only thing larger than 2x2 is the core, and that’s not a sensor. Link to comment Share on other sites More sharing options...
Lurkily Posted November 25, 2018 Author Share Posted November 25, 2018 Sorry, yes. I had the square measurement (2 square units, 4 square units) stuck in my head, not the dimensions. Yes, 2x1, and 2x2. Link to comment Share on other sites More sharing options...
Garheardt the Black Posted November 25, 2018 Share Posted November 25, 2018 So to be clear, we've established that this proposition/versus various alternatives will reduce the overall survivability of drones that would have to rely on it. So, that's one con. Link to comment Share on other sites More sharing options...
Lurkily Posted November 25, 2018 Author Share Posted November 25, 2018 I'll grant you that; any necessary part reduces survivability. You can mitigate it, just as you can mitigate the vulnerability of a battery, by having a backup. And as it's a factory-built drone, (in most cases it would be, I'd think,) you could always build another. I think logic should localize, though. If that does happen, this will not be any weaker than our current wireless connectors. If it does not happen, and you continue to require splitters to avoid crosstalk, you still need connectors on those drones, and it will be no weaker than they are now, and provide advantages in avoiding crosstalk there, as well. Link to comment Share on other sites More sharing options...
Garheardt the Black Posted November 25, 2018 Share Posted November 25, 2018 You can split off a factory that produces the drones to prevent crosstalk already. A one-way splitter added to the current architecture wouldn't require any connectors at all and would still enable communication. Also, we can't assume that most folks will be using factories for all of their drones. Just be being active here, we're identifying as a (somewhat obsessive) minority. *I see a lot of benefits to a range of these ideas, but you asked for a devil's advocate, and what devil wouldn't comply? 😁 Edit- mighta miss spoke on the cross talk bit. brb! Edit 2- yup, have to put the splitter farther down. My mistake Edit 3- mostly circumvented by using multiple factories though. Link to comment Share on other sites More sharing options...
Lurkily Posted November 25, 2018 Author Share Posted November 25, 2018 You probably caught this already from the sound of your edit; the drones built from the factory would still crosstalk - the splitter has to be a child of the factory so that copies of the drone don't talk to each other. You're right that sometimes people put their sub-drones on decouplers - more, probably, when progression is implemented, and factories aren't something every newbie can throw around willy-nilly. I don't think there's much advantage or disadvantage for that scenario, where logic is either wired or wireless. No worries; you're bringing exactly what I hoped for. The real gold only shines through when you REALLY try to defeat an idea, and fail, not when you try to support it, and succeed. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now