Basil Posted January 27, 2019 Share Posted January 27, 2019 ALL CREDIT GOES TO @Skysplash8 FOR THE ORIGINAL POST!! So, obviously, I was super inspired to find out Dragon Tear's exact pattern cause... my dumb self literally took ONE screenshot of her and that was just a nice aesthetic picture of her lol So, I just want to kindly ask you all to help me find out her pattern, since I can't do it myself because.. nO coMpUtEr aH Here she is, and happy hunting! 4 Link to comment Share on other sites More sharing options...
bostonlobstah Posted January 27, 2019 Share Posted January 27, 2019 i tried before and failed. I'll hafta try again I guess Link to comment Share on other sites More sharing options...
Spacestar TheThundersuncat Posted January 27, 2019 Share Posted January 27, 2019 First attempt: Looks like a B pattern with very thin density. But it kind of isn't. Please ignore the colour. Attempt 2) Getting there! Size small+ tiny Now they both just look wrong Finally! A lead! Thick+ medium density Medium size Size tiny+ huge This just doesn't work Attempt 3: meet dragon tear 3 Big pattern, medium density Almost on the body (Big+medium pattern) That's the closest for now. New post. 3 Link to comment Share on other sites More sharing options...
Spacestar TheThundersuncat Posted January 27, 2019 Share Posted January 27, 2019 Allright, I give up. Here's three almost Dragon-Tears 1 Link to comment Share on other sites More sharing options...
Spacestar TheThundersuncat Posted January 27, 2019 Share Posted January 27, 2019 I can either get the body + tailfin right or the head. Don't know why. Breeding them results only in even worse knock-offs. There's no middle way, but whether I went with the thin side of density or the thicker, it just isn't right. Link to comment Share on other sites More sharing options...
georgie Posted January 27, 2019 Share Posted January 27, 2019 By the way, Philo said that patterns are always slightly different even if you have the same pattern genes. You can get close, but you can't replicate her 1 Link to comment Share on other sites More sharing options...
Lilytuft Posted January 27, 2019 Share Posted January 27, 2019 1 hour ago, heyitsgeorgie said: By the way, Philo said that patterns are always slightly different even if you have the same pattern genes. You can get close, but you can't replicate her It's only that way with spots 2 Link to comment Share on other sites More sharing options...
Basil Posted January 27, 2019 Author Share Posted January 27, 2019 4 hours ago, Lilytuft said: It's only that way with spots Yea so that's why I thought I had a better chance at getting a replication of Dragon Tear cause the mask patterns are usually exact every time they're replicated 1 Link to comment Share on other sites More sharing options...
Basil Posted January 27, 2019 Author Share Posted January 27, 2019 7 hours ago, RandomWanderer said: I can either get the body + tailfin right or the head. Don't know why. Breeding them results only in even worse knock-offs. There's no middle way, but whether I went with the thin side of density or the thicker, it just isn't right. It's so close! Just onnneee more little glove on that right paw and then boom! Also I'm liking that edgy Dragon Tear lol 1 Link to comment Share on other sites More sharing options...
Spacestar TheThundersuncat Posted January 27, 2019 Share Posted January 27, 2019 Further tests: Thick thin density, huge medium size Tiny+ small, thin + v. Thin Close, but not it. Tried about everything I could think of, so you might have more luck yourself trying any of the above and changing genes here and there. The medium option often results in only one glove, but so do some others. 1 Link to comment Share on other sites More sharing options...
iikuzal Posted January 27, 2019 Share Posted January 27, 2019 This is the best I can make her, I think it's really close but it's still not quite right... size huge+small density very thick+thin 1 Link to comment Share on other sites More sharing options...
Aether Posted January 27, 2019 Share Posted January 27, 2019 There's a pattern project that you can look at to knock of some it doesn't have all but puts in important notes it's how I found Hornets pattern! (I think you found it though) Link to comment Share on other sites More sharing options...
Spacestar TheThundersuncat Posted January 27, 2019 Share Posted January 27, 2019 25 minutes ago, Aetherskye said: There's a pattern project that you can look at to knock of some it doesn't have all but puts in important notes it's how I found Hornets pattern! (I think you found it though) I looked at all of them. Unfortunately, patterns look different on the big nose. It's not useful for that stripe of hers. Tried one of theirs for attempt one. Link to comment Share on other sites More sharing options...
Broken Posted January 27, 2019 Share Posted January 27, 2019 27 minutes ago, Larouxia said: This is the best I can make her, I think it's really close but it's still not quite right... size huge+small density very thick+thin It looks almost similar, but the chest pattern is too big. Link to comment Share on other sites More sharing options...
Spacestar TheThundersuncat Posted January 27, 2019 Share Posted January 27, 2019 For anyone trying, the thinner patterns sometimes have her tailfin. Found only one bigger pattern with a striped tailfin, on the other hand. Might be a lead, but they commonly lack that stripe of hers. When they have it, it's way too big. Just where the heck is that configuration hiding? Link to comment Share on other sites More sharing options...
Spacestar TheThundersuncat Posted January 27, 2019 Share Posted January 27, 2019 Got a little bit closer Huge/Medium pattern Very thin/very thick density Almost there, the tailfin isn't right and the stripe a little too thick. My off-brand Dragon Tear clones attracted an even cheaper one. It seems the tailfin only needs a little push. 2 Link to comment Share on other sites More sharing options...
Spacestar TheThundersuncat Posted January 27, 2019 Share Posted January 27, 2019 The black and the pink clone don't look too bad. But no striped tailfin 4 Link to comment Share on other sites More sharing options...
Renio2490 Posted February 5, 2019 Share Posted February 5, 2019 1 Link to comment Share on other sites More sharing options...
Renio2490 Posted February 5, 2019 Share Posted February 5, 2019 I can't use the console on this save, so I can't give her a tail fin. Link to comment Share on other sites More sharing options...
Kitten Posted February 5, 2019 Share Posted February 5, 2019 5 hours ago, Renio2490 said: I think that might be it! Link to comment Share on other sites More sharing options...
Renio2490 Posted February 5, 2019 Share Posted February 5, 2019 It's actually pretty off. But it's close for something I didn't make with the console. Link to comment Share on other sites More sharing options...
Kwainie Posted March 3, 2019 Share Posted March 3, 2019 I literally just randomized this Pattern density very thick, Pattern density very thin Medium pattern, huge pattern Pattern shape B, recessive D, Mask I also used the pattern shapes to see if she had the right tailfin -- she did! 3 Link to comment Share on other sites More sharing options...
bostonlobstah Posted March 3, 2019 Share Posted March 3, 2019 50 minutes ago, Kwainie said: I literally just randomized this Pattern density very thick, Pattern density very thin Medium pattern, huge pattern Pattern shape B, recessive D, Mask I also used the pattern shapes to see if she had the right tailfin -- she did! Oh my gosh, HOW But wait, does she have just dark tail tips or the whole fin part? Link to comment Share on other sites More sharing options...
Kwainie Posted March 3, 2019 Share Posted March 3, 2019 1 hour ago, bostonlobstah said: Oh my gosh, HOW But wait, does she have just dark tail tips or the whole fin part? What do you mean? 1 Link to comment Share on other sites More sharing options...
bostonlobstah Posted March 3, 2019 Share Posted March 3, 2019 In this pic it looks like only the tips or her fin are gray, am I correct? Otherwise looks spot on 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now